How to control the process conditions of the stenter setting machine?

In the process of actual use of open rotary printer, it basically uses soft processing to continuously improve the quality of the cloth, so that they can meet the actual needs of customers. Of course, it is usually not on the entire cloth guide wheel. There will be some scratches, but sometimes these equipment must be flat during actual use, because only in this way can the cracks or creases formed during the entire equipment processing process be eliminated.

It should be noted that if you want to achieve this ideal effect during the actual use of the stenter setting machine, then the relevant process must be formulated reasonably during operation, and the setting temperature is usually very important. Yes, pay attention to their shrinkage or other thickness. Only in this way can the entire temperature have its own set standards in the actual design process. If the final temperature is set too high, it will definitely be If the strength is lowered and the elasticity is relatively low, it may also reduce the possibility of discoloration of the braid.

Secondly, during the actual use of the stenter setting machine, we should also pay attention to reasonable control of the speed of the entire equipment. Under normal circumstances, the operating speed still depends on the length of the final equipment and the qualitative temperature. If the speed is too fast, It will definitely affect the final processing effect of the entire equipment, and it may also cause the entire equipment to process some finer wrinkles during use. Therefore, when the speed of the vehicle is relatively slow or the temperature is relatively high, there are also May cause yellowing of the entire braid.

Therefore, the process of the stenter setting machine of Flat Screen Printing Machine Factory must be controlled within reasonable parameters.