If you have a heavy-duty commercial fan installed in the unit, then you have to take precautions. The fan can rotate at extremely high speeds. The blades of the fan may have groves. This is why most industrial-grade fans are well protected inside the metal cage.
- There are basic safety hazards that you should be aware of in advance
- Operating fan without taking precautions can be dangerous
- You also need to inspect the fan regularly
You can search for the best commercial fans maintenance team for proper inspection. It is also important to stay alert when the fan is in operation mode. Some basics to keep in mind are listed here below.
- Safety with electrical points
The first thing that you need to keep in mind is that the fan can be directly connected to a high electrical outlet. These types of fans will usually consume high electrical voltage. This means you need to take precautions, even if the fan is not running.
As long as the fan is connected to the electrical point, you have to avoid direct contact. Any loose wire can pose a serious threat. It is also important to keep the maintenance updated.
- Stay away from the propeller
Any fan will have a propeller system connected to the blades. The propeller unit will usually get overheated if the fan has been running for a while. These types of fans will often get overheated within few minutes.
So it is advisable to avoid contact with the propeller system in most cases the fans could have a propeller unit installed at the backside. You will also come across fans that have a propeller unit installed on the front side.
- Always test the unit
Before you keep the unit running for extended hours, always ensure that it has been tested by a professional team. There are chances that the check nuts are loose. If this happens then a serious accident can happen.
You should always test the commercial fans with a starter unit. The moment you are testing ensure the fan is not energized. Test the system only if the fan is perfectly guarded.
- Check the wind direction
The fan will always rotate at a very high speed. The wind direction can change instantly the moment it is switched on. You have to stay prepared for the wind rotation. The fan can have two directions of the wind.
You should keep the direction of the wind in your mind. There are chances that the blades can also rotate the propeller system. Do not touch the fan propeller unit if it is running.
- Check your cloths
The fan could be rotating at a slow speed, but that does not mean that it is safe. The sleeves can easily be caught up in the blades. It is important to ensure that you are wearing protective clothing so the sleeves and belts are not exposed to the blades.
Always maintain proper distance when operating commercial fans. During the start-up try and maintain a safe distance from the blades.
If the fan is powerful then it will pull the air with great speed. All types of electrical connections should always be checked.
