If you live in a home with a detached garage, you’ll probably take your garage door for granted until it stops working all of a sudden. A malfunctioning garage door can be quite inconvenient and even scary if you park your car inside often.
Luckily, there are several things that you can do to get your garage door up and running again quickly. If everything appears to be working as it should but your garage door still won’t open or close, then continue reading for some helpful advice on what to do next.
- Check the fuses
- Check the light switches
- Check the doors’ battery
- Check the garage door opener
- Check the fuses
If the lights above your garage door won’t turn on or stay on, check the fuses first. If they don’t appear to be the cause of the problem, then check the bulbs. If a fuse is blown, then you’ll need to replace it with one of the same amperage ratings.
You can do this yourself, but be careful to avoid electrocuting yourself along the way. If you aren’t comfortable with this DIY project, then call a professional from garage repair Lexington KY.
- Check the light switches
If your garage door opens and closes just fine but the lights above it don’t turn on or stay on, then there could be a problem with the light switches. You’ll probably find them just above the door or beside the opener.
You’ll need to pull the covers off of them to see what’s inside. If they appear to be the cause of the problem, then they’ll need to be replaced. You’ll also need to screw in a new light switch and reconnect the wires. Be sure to turn the power back on after finishing the job.
- Check the doors’ battery
If your garage door opener won’t close or open the door, then there could be a problem with the batteries in the remotes. To test this out, you’ll need to remove the battery from the remote and then wait a few minutes.
Next, you’ll need to press the button and hold it for 10 seconds. If the door doesn’t open or close after doing so, then the remote’s batteries are probably dead. If the door does open, then you should get a new set of batteries for the remote.
- Check the garage door opener
If your garage door still won’t open or close, then you’ll need to check the opener. You can do this quickly by pressing the “open” and “close” buttons a couple of times. If the door doesn’t respond to these commands, then you’ll need to check the connection to the opener.
First, unplug the opener and then check the garage door’s spring(s). If they appear to be intact or there are no signs of wear and tear, then you’ll need to check for anything that could be blocking the opener’s sensors. You can contact garage repair Lexington KY and seek their help.
- Professionals can fix garage doors the right way
If your garage door stops working all of a sudden, you can use this article to troubleshoot the problem and get it back up and running again. If you notice any signs of wear and tear, then you’ll need to replace the springs or roller(s) and possibly get a new opener as well. Don’t forget to keep an eye on the garage door opener’s battery, fuses, and bulbs too!
