Tips and tricks to fix your garage door remote quickly

Comments · 380 Views

When the remote malfunctions, your garage door annoys you. Before calling the garage door Lexington KY service pros for assistance

When the remote malfunctions, your garage door annoys you. Before calling the garage door Lexington KY service pros for assistance, it is quite a natural curiosity for most of us to try fixing things on our own. To help you, the best garage door repair Lexington KY pros provide some tips here.

 

Replace the batteries

 

If the remote isn't working properly, try operating from the control panel mounted on the wall. If the garage door is responding well to the control panel, then the problem is with the batteries. Most probably, the batteries must be drained. A non-functional remote usually means battery problems, which occur most often.

 

Most of the batteries will have a life span of two years. Just in case the remote stops signaling well within this period, you can talk to the supplier. The fresh batteries that you replace must match the older ones exactly. Consult the garage door repair Lexington KY pros for assistance. If the remote is dropped and severely damaged, it will no longer function. Weather conditions can also affect the quality and functionality of the remote.

 

Disrupted signals

 

Disrupted signals can be caused for a few reasons. If there is any obstruction between the remote and the sensor, then the remote may not be working. There is this possibility of using the remote from out of range too. in that case, there is no response from the receiver. There is also the possibility that the antenna on the remote sensor is broken. As a result, you must always use a remote that is within range, which is most likely within 20 feet of the garage door.

 

Antenna direction

 

The signal cannot be detected if you are at that distance. Remove all the objects that were blocking the signal from your remote to the sensor. Look at the antenna and check if it is directly pointing toward the garage door. If there is any dust or dirt built up on the antenna, and then remove it. Sometimes there is a possibility for an antenna to be broken. In one such case, all you have to do is just contact the garage door repair Lexington KY professionals to come to inspect and fix it then and there.

 

Whether it is because of the drained batteries or because of the damage to the remote, the problems have to be fixed immediately. Procrastination in having things corrected can occasionally result in control unit jamming.

 

Lock and Reset

 

Sometimes, by mistake, the lock button is engaged in the control panel. If the remote is not working, then just look at the lock button in the garage. Make sure that it is not accidentally pressed by anyone. Unlock it for smooth functioning again. There is another possibility to completely disengage the lock as well. You can disengage the lock of the garage door opener by pressing the lock button for some time. See the button provided in the control panel.

 

When the garage door opener is used repeatedly with the remote, the remote may become disconnected from the garage door control unit's signals. This is a simple thing to solve. You can just reset the remote immediately.

 

Conclusion

 

Even after trying all of the above ways, if you could not fix the problem, then get assistance from the garage door repair Lexington KY service pros. It is not just only for the unit’s remote-related issues, but also for any other installations and maintenance work related to the garage door opener, you can call the garage door Lexington KY specialists.

Comments