Troubleshooting Tips for a Hoover Cordless Vacuum That Keeps Shutting Off

Comments · 233 Views

Troubleshooting Tips for a Hoover Cordless Vacuum That Keeps Shutting Off

Cordless vacuums are convenient and easy to use, but they can be frustrating when they keep shutting off in the middle of cleaning. This is a common problem that can happen with Hoover cordless vacuums, but there are several troubleshooting tips you can try to get your vacuum running smoothly again. hoover cordless vacuum keeps shutting off.

 

Check the Battery Level

The most common reason for a cordless vacuum to shut off unexpectedly is a low battery. Before you start cleaning, make sure the battery is fully charged. If the battery level is low, charge it until it's fully charged and try again.

 

Clean the Filter

Another reason your Hoover cordless vacuum may keep shutting off is a clogged filter. Over time, dust and debris can accumulate in the filter, reducing the suction power of the vacuum. To clean the filter, remove it from the vacuum and rinse it under running water. Allow it to dry completely before reinstalling it.

 

Clear the Brush Roll

If the brush roll is clogged with hair or debris, the vacuum's motor may shut off to prevent damage. To clear the brush roll, turn off the vacuum and unplug it. Use scissors or a brush to remove any hair or debris from the brush roll.

 

Check the Hose

If the vacuum's hose is clogged or kinked, it can reduce suction power and cause the vacuum to shut off. Check the hose for any clogs or kinks, and clear them if necessary.

 

Reset the Vacuum

If none of the above troubleshooting tips work, try resetting the vacuum. To do this, turn off the vacuum and unplug it. Remove the battery from the vacuum and wait for at least 30 seconds. Reinsert the battery and turn on the vacuum to see if it works.

 

In conclusion, a Hoover cordless vacuum that keeps shutting off can be a frustrating problem, but there are several troubleshooting tips you can try to get it running smoothly again. Start by checking the battery level, cleaning the filter, clearing the brush roll, checking the hose, and resetting the vacuum. If the problem persists, contact Hoover customer service for further assistance.

Comments